Rubber gym flooring Energy Crossfit: Main Features
- High resistance to impacts, abrasion and wear.
- Excellent sound absorption, perfect for Crossfit
- Low maintenance.
- Indoor and outdoor flooring.
- Available in tiles
Sports flooring Energy Crossfit: Presentation
Energy Crossfit rubber gym flooring is specially designed to those areas that require higher cushioning.
It is manufactured with more quantity of raw material, and it is subjected to a greater pressing, which makes it a dense and highly resistant flooring.
It is also a safe ground against rebounds of heavy objects like disks or weights.
These solid recycled rubber tiles are a homogeneous soil suitable for heavy wear areas. The CF tiles can also be placed outdoor, since the binder used is prepared for it.
Durability, flexibility, safety, comfort, sliding resistance and aesthetic appeal make Energy CF the perfect solution for bodybuilding and crossfit practice.
This innovative surface has excellent acoustic insulation properties and is long lasting.
Flexibility and permanent resilience are the main characteristics of the Energy Crossfit floor.
Safety is the number one concern for Energy Crossfit rubber floors: it offers excellent slip resistance.
Energy Crossfit: Ranges
Energy CF 20 informations
Energy Crossfit 20 is a rubber flooring suitable to install in bodybuilding and Crossfit areas. Available in tiles (100×100 cm) and 2 cm thickness.
Energy CF 40 informations
Energy Crossfit 40 is a recycled rubber flooring to install in bodybuilding and Crossfit areas. Available in tiles (100×100 cm) and 4 cm thickness.
Sports flooring Energy Crossfit: Specifications
|Range||Dimension||Thickness||Weight / sqm|
|Energy CF 20||100×100 cm||20 mm||18 kg|
|Energy CF 40||100×100 cm||40 mm||30 kg|
Energy Crossfit installation
Install Energy Crossfit flooring on a dry, levelled, rigid and clean sub-floor. Place the tiles side by side covering the entire surface.
They can be installed in a floating way, gluing only the perimeter or all the tiles, depending on the use that will be given to them.
Allow the adhesive to dry for 24 hours.
Energy Crossfit maintenance
Energy Crossfit tiles require no specific maintenance, more than regular cleaning.
It can be done with a vacuum cleaner to remove dust and dirt. Then mop the floor only with water, or use a mix of water and neutral detergent diluted (50: 1). No abrasive or aggressive chemicals may be used.
It is advised that the mop used for this floor, should not be used for any other, as they may contain residues that damage the rubber.